• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Do a Door Lock Change

Change of the door lock is a quick and cheap method to increase your home's security. This isn't for all. It requires a certain amount patience and skill.

The cylinder is inside the knob body. The cylinder recognizes the key when it is inserted into the lock.

Remove the old lock

The first step in replacing a door lock is to remove the old one. It is a fairly straightforward process, however you must keep a few things in mind. First, ensure that your new lock is the correct size for your door. This will ensure it is secure and doesn't create a gap around the deadbolt or latch.

After you have removed the latch plate, you'll need to look for two screws or bolts on the inside of the casing which are holding the casing to the lock halves. Remove them with a screwdriver and then take the lock out of the door. If you have a mortise locking, there could be a set screw located at the base of the handle that holds it to the spindle. Take off the doorknobs by removing this screw using the help of a screwdriver.

You must also take the deadbolt and latch plug from the hole in your door jamb. Then, you are able to install your new lock. If you are replacing a mortise lock you must also measure the distance between the lock case and the door's edge to ensure that the new lock will be able to fit.

You might want to change your lock for a variety of reasons, such as the possibility that someone else has the key or you have a new roommate. In any event, you could save money by taking the lock off yourself instead of paying a professional to do it. The process is easier than many people imagine and can be done in a few minutes.

Remove the trim and handle of your door. Then, pull the trim away with a flat screwdriver. You will be able to pull off most of it, and in some instances the handles could come off completely. The next step is to look for a pinhole on the inside of the handle, and insert a straightened clip into it. This will activate the release mechanism, which allows you to remove the handle. Look for a small tab on the interior of the lock and push it using a flat screwdriver. Once the spindle has been removed, you are able to take off the cylinder and housing.

Selecting a new lock

There are many options to choose from when it comes to selecting the right lock. Consider different types of locks, and choose one that is compatible with the style of your door. Take into consideration the backset (the distance between the edge of the door and the center of the lock hole) and the cross bore (small hole along the edge of the door frame). Select a lock that is suitable for the door's thickness and the swing.

Most door locks are graded by BHMA and the American National Standards Institute to give you an idea of how well they stand up to use and how difficult to pick or disable. A grade 3 lock may be a good choice for a tranquil suburban apartment complex, whereas the grade 1 lock may stand up to the traffic at a busy store front on a city street.

Most smart door locks require digital code to open. If you are worried about hacking or other security concerns, consult a professional locksmith.

replace window locks upvc the cylinder

It is easy to replace damaged or broken door window lock replacements cylinder by doing an easy DIY project. The trick is to select the correct cylinder and follow the instructions that are included with it. The first step is to take off the knob or handle if there is one and then remove the trim that is attached to the base of the lock cylinder with the aid of a screwdriver. Once the trim is removed, you can access the screws that secure the cylinder and remove them using a flathead screwdriver. The cylinder is then gently removed away from the door.

Before you install the new cylinder, make sure that it is the right length for your door. Measure the distance from the center to the left and right sides of the cylinder with an instrument. Then, buy an additional cylinder using the same measurements. This will prevent the cylinder from snapping, which can occur when the door is kicked in or when the key gets stuck inside.

Install the replacement cylinder into the door, and then turn the key. This will align the cylinder with your carrier that is usually located on the outside of the lock. Then, you can loosen the set screw that should be a few turns in the head. If there is a screw located on the exterior of the case that is holding the door, you'll need to remove it.

After taking the lock cylinder out after which you can replace window lock it with the new lock by sliding the new cylinder into the case and tightening the set screw. You should also reinstall the part that connects the cylinder to the lock indicator stem that you can do by pulling up three small tabs on the back of the cylinder using needle-nose pliers. Attach the bracket that is smaller to the cylinder's back. You must then install the strike plate and latch plate, as well as the retaining rings attached to the top of the lock cylinder.

Installing the new lock

If you're replacing a previous lock, you must begin by measuring the width of your door. Most residential locksets are designed for doors with a thickness of 1 3/8 to 3/4 inch. If your door is thicker than 1 3/8 to 1 3/4 inches, you'll need a thicker door kit. This would include longer screws as well as an extension for the spindle or a longer tail piece for door knobs.

Most locks come equipped with a thorough installation guide to aid you. Read the instructions carefully before beginning the process to ensure that you are following all the steps. The booklet will also give you an idea of the level of skill required to perform the task. You might want to ask a friend who has worked with locks for assistance if you are changing locks for the first time.

It's a good idea to tape the openings in the old lock before installing the new lock. This will stop the screws from falling out of the holes and will safeguard any tile you may have installed in the area. It also protects against possible damage caused by rust, dirt, and grime. SECURAM Touch comes with a piece of painter's tape that is intended to be used for this purpose, however you can also use gaffer's or masking tape if you have it available.

Once you've removed the screws holding the interior portion of the lock section to the exterior side, pull it straight away. This must be done quickly to avoid the window lock replacement from accidentally closing and damaging the mechanism.

Install the new latch bolt into the upper cross bore of the new upvc window lock replacement, if it has one. Be sure to put it in the correct place that is usually indicated by an indication on the faceplate. Then, you can screw the latch plate onto the bolt.

Finally, screw in the deadbolt and strike plates to the door jamb. Test the deadbolt by throwing it a few times to verify that it extends all the way into the strike plate and is completely secured. If you're using an electronic smart lock, make certain to follow the instructions to program it. This requires downloading an application and registering your email address, verifying you identity and connecting to the wireless network in order to add your device.